CNC TOS WHN 13.4 BORING MACHINE CNC MEFI 859 REVISED AFTER 2000 The machine has continuous control. Last year, the spindle bearing was repaired, new bearings were installed, the engine was replaced with a reconditioned one, the clearance on the z-axis was defined - the wedge adjustment bed was adjusted, and the oil dispensers for lubrication were completely replaced, All axes 4 including table are controlled cnc and respect C. E electric norms. Media system. It was delivered together with the electric box during the modernization of the machine after 2000 year. The spindle has new bearings and a new motor. The machine has a completely new lubrication system. **Main machine parameters Working spindle diameter: 130 mm •Spindle taper: 50 ČSN 22 0430 •Working spindle extension: 800 mm •Working spindle speed: 8 ranges in geometric series: 12.5 - 800 rpm and the possibility of percentage change during operation in the range of 10-110%: 1.25 - 900 rpm Hollow spindle flange diameter: 280 mm Hollow spindle (7:24) centering cone diameter (max.): 180 mm Maximum spindle torque (at speeds 12.5 - 31.5): 10,300 Nm Vertical adjustment of the working spindle axis (Y): 2,000 mm Longitudinal adjustment of the stand (W): 1,250 mm Transverse adjustment of the table (X'): 2,000 mm Table clamping surface: 1,600 x 1,800 mm Maximum table load: 120 kN T-slot size: 22 ČSN 02 1030 T-slot spacing: 160 mm Machine weight including electrical equipment: 32,000 Kg Video here : https://youtu.be/CUucvpw7xoM Best price upon request.